Automatic 6-Cycles Battery Charger

€240.78
Tax included
Automatic 6-Cycles Battery Charger
FEATURES
   * Automatic 6-Cycles Battery Charger.
    * Tester of the Battery on board.
    * Printed report of the tests executed (optional).
    * The Standard Kit includes the Battery Connector with clamps.
Battery Charger:
    * New Charging Algorithm performing 6 Cycles: Initialization, Soft Charge, Bulk Charge, Absorption/Desulfation (Recovery of the Lead-Acid cells), Maintenance, Battery Self-Discharge Check.
    * The new Algorithm makes the device ideal to initialize new Batteries as well as to recover/recharge used/exausted Batteries.
    * LCD Back-lightened Display indicating the Cycle executed and the Battery State of Charge in real-time.
    * Diagnostics: real-time detection and communication of occurring anomalies.
Tester:
    * The operator, in about 1 minute, can execute a complete Test of the Battery and the engine Alternator, guided step-by-step by the instructions in scrolling on the Display (user-tutoring device).
    * TTests performed: Battery voltage in Null-load condition, behaviour of the Battery during the engine Start-Up (Cranking Volts & Duration), Test of the engine Alternator.
FUNCTIONING
Battery Charger:
    * In case of regular functioning, the LCD Display shows the following messages:

“BATTERY IN ... CHARGE / ... ABSORP. / ... MAINTEN.” according to the Cycle executed.
    * In case of irregular functioning, the LCD display shows diagnostics messages.
Tester:
1. Testing the Battery voltage in Null-load condition: it measures and computes the average Battery voltage at rest; the outputs of this Test are the following:
    * average Battery voltage at rest (range 5.0V .. 19.9V);
    * estimate of the Battery State-of-Charge Parameter (range 0 .. 100%).
2. Testing the behaviour of the Battery during the engine Start-Up (Cranking Volts): it measures the minimum Battery voltage during the engine Start-Up and the duration (in milliseconds) of the Start-Up itself. The result of the Test will be one of the following evaluations: “Excellent”, “Good”, “Fair”, “Poor”.
3. Testing the engine Alternator: it verifies the correct functioning of the engine Alternator. The Test measures the average Battery voltage as the engine is running (range 5.0V .. 19.9V). The result of the Test will be an evaluation of the vehicle’s Recharging System.   
Quantity

BC TWIN PRO